Brine Shrimp Hatchery,Brine Shrimp Eggs Incubator Hatchery Artemia Eggs for Aquarium Brine Shrimp Eggs
Specification:
Condition: 100%Brand New
Material: Plastic
Color: As shows in pictures
Height: 27.5cm / 10.83in
Outer diameter: 5cm / 1.97in
Thickness: 0.2cm / 0.08in
Package List:
1* Brine Shrimp Eggs Incubator
1* Lid
Precaution:
1. Inject the treated water into the standard water level line of the incubator tank, and add about 10g of coarse salt to dissolve in advance.
2. Connect the air pump to the air inlet hole at the bottom of the incubator, adjust the air volume to an appropriate amount. The ideal temperature is 28-30°C. 3. Re-inject approximately 3 to 5g of brine shrimp eggs and incubate for about 36 to 48 hours (depending on the incubation temperature and the quality of the shrimp eggs).
4. Collection operation: After hatching of the brine shrimp eggs, stop pumping and let stand for about 10 to 15 minutes. When the hatched shrimps sink to the bottom and the shrimp shells float up, you can collect shrimp larvae from the original air inlet at the bottom of the incubator (air conditioning valve).
5. Uneaten brine shrimp larvae should be stored in the refrigerator to freeze.
6.Please adjust the input gas volume. If the input gas volume is too large or too small, it will affect the hatching time and survival rate of the brine shrimp eggs. Please adjust the input gas volume with the air conditioning switch.
7. The bottom air supply port is connected with a simple check valve, which can effectively prevent water backflow in the incubator.
8. It can also be installed in an aquarium and hatched at a constant temperature in the aquarium.
9. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
$21.39
Worth: $21.39
(as of Oct 31, 2022 11:51:18 UTC – Particulars)
Specification:
Situation: 100percentBrand New
Materials: Plastic
Colour: As exhibits in footage
Top: 27.5cm / 10.83in
Outer diameter: 5cm / 1.97in
Thickness: 0.2cm / 0.08in
Package deal Checklist:
1* Brine Shrimp Eggs Incubator
1* Lid
Precaution:
1. Inject the handled water into the usual water stage line of the incubator tank, and add about 10g of coarse salt to dissolve upfront.
2. Join the air pump to the air inlet gap on the backside of the incubator, alter the air quantity to an acceptable quantity. The best temperature is 28-30°C. 3. Re-inject roughly 3 to 5g of brine shrimp eggs and incubate for about 36 to 48 hours (relying on the incubation temperature and the standard of the shrimp eggs).
4. Assortment operation: After hatching of the brine shrimp eggs, cease pumping and let stand for about 10 to fifteen minutes. When the hatched shrimps sink to the underside and the shrimp shells float up, you may acquire shrimp larvae from the unique air inlet on the backside of the incubator (air con valve).
5. Uneaten brine shrimp larvae ought to be saved within the fridge to freeze.
6.Please alter the enter gasoline quantity. If the enter gasoline quantity is simply too massive or too small, it’s going to have an effect on the hatching time and survival price of the brine shrimp eggs. Please alter the enter gasoline quantity with the air con swap.
7. The underside air provide port is linked with a easy examine valve, which may successfully forestall water backflow within the incubator.
8. It can be put in in an aquarium and hatched at a relentless temperature within the aquarium.
9. Please permit 1-3cm error as a consequence of handbook measurement and ensure you don’t thoughts earlier than ordering.
User Reviews
Be the first to review “Brine Shrimp Hatchery,Brine Shrimp Eggs Incubator Hatchery Artemia Eggs for Aquarium Brine Shrimp Eggs”
You must be logged in to post a review.
Related Products
There are no reviews yet.